DIGITAL EURO PROFILE DOUBLE-KNOB CYLINDER 3061 – FD.

Digital locking cylinder with sealed electronic component assembly for doors in accordance with DIN 18250 with Euro Profile locks in accordance with DIN 18251. It evaluates the radio signals from transponders and grants or refuses access.

TECHNICAL SPECIFICATIONS.

  • Standard Euro Profile cylinder in accordance with DIN 18252 / EN1303, stainless steel, freely rotating on both sides
  • Knob diameter: 30 mm
  • Basic design length: 30-30 mm (external / internal dimensions)
  • Overall length: up to a maximum of 140 mm (a maximum of 90 mm on one side), special lengths on request
  • Protection category: IP 54, version .WP: IP 65
  • Battery type: 2 x lithium CR2450 3 V
  • Battery life: up to 300,000 actuations
    or up to ten years on stand-by
  • Temperature range:
    operation -20 °C to +50 °C,
    storage -35 °C to +50 °C
  • 3,000 access instances can be stored
  • Time zone groups:
    G1: 5+1
    G2: 100+1
  • Number of transponders
    that can be managed per locking cylinder:
    G1: up to 8,000
    G2: up to 64,000
  • Number of locks per transponder:
    G1: up to 48,000
    G2: up to 304,000
  • Various continuous opening modes
  • Can be directly networked with integrated LockNode (network knob cap WN(M).LN.I) or via external LockNode with additional door monitoring function
  • Upgradeable firmware
  • Can be used as a gateway, can be freely configured (G2 version only)

PRODUCT VERSIONS.

Digital Euro Profile Double-knob Cylinder 3061 – FD
Design length 30-30 mm, freely rotating on both sides, stainless steel		 Z4.30-30.FD
Digital Euro Profile Double-knob Cylinder 3061 – FD
with G2 functionality:
Design length 30-30 mm, freely rotating on both sides, stainless steel		 Z4.30-30.FD.G2
Brass version .MS
Version with access control, time zone control and logging .ZK
Version with button control
(can be operated from inside without transponder),
not available with G2 functionality		 .TS
Version VdS class AZ approval, SKG*** approval .SKG
VdS version
Version with access control,
time zone control and logging, VdS class BZ approval, SKG*** approval, together with block lock function can be used up to class VdS C/SG 6 in the appropriate installation		 .ZK.VDS
Multi-ratchet version:
For use in doors with multi-point locking, from design length 35–30 mm		 .MR
Fire-retardant version:
For use in steel and fire protection doors		 .FH
Weatherproof version:
Protection category IP 65, from design length 30–35 mm, not available in combination with .TS, .MR and VdS versions		 .WP
“Network Inside” version with integrated LockNode .WN
“SmartCard” version SmartCard Cylinder

DESIGN LENGTHS
(all lengths: outside – inside)
Overall length between 65 mm and 80 mm e.g.
Z4.40-40.FD
Overall length between 80 mm and 100 mm e.g.
Z4.40-60.FD
Overall length between 100 mm
and a maximum of 140 mm
(a maximum of 90 mm on one side)		 e.g.
Z4.65-75.FD
Overall length over 140 mm or over 90 mm on one side on request
 

   

Download Product Information Sheet
"Digital Locking Cylinders" (PDF)